FAQ’s: Momentum M10 Batteries and Chargers

Please note

The MB6 battery can only be charged from the original Momentum chargers due to the safety requirements of the integrated Canbus system.

This means that the charger and the battery perform a security handshake before any charging can begin to ensure that two compatible items are working togeher.

The standard charger is an 85v 18 amp charger and so it therefore charges at around 1,500 to 1,600 watts.

As the MB6 battery has 6.4kWh of capacity it means that the battery will generally charge from dead flat in well under 5 hours, but of course the battery is very rarely going to be completely empty.

The great thing about this charger is that it only draw around 7 amps from a normal 3 pin plug socket so it can be used at pretty well any standard harbour power bollard without fear of tripping it.

In summer 2026 a new faster charger will become available which will be an 85v 30 amp charger so capable of charging at up to 2,550 watts. The input power is limited to 11 amps so there is no problem with it potentially tripping a standard 3 pin 13 amp plug and this higher charging brings the time to charge from zero to hero to just over 2 1/2 hours.

This is still a very low charge speed for these very high quality batteries so you will not ned to worry about over charging them or them overheating as the powerful Battery Management System takes care of everything maintaining an active connection and dialogue between the charger and the battery.

Find out more about the Momentum M10 package here.